Counseling hotline:

18331997691

Location now:Home > News > Common problem > Text
CONTACT

Hebei Shengbo Pump Industry Co., Ltd

Hebei Shengbo Pump Industry Co., Ltd

Factory Address: Industrial park of Baixiang County, Xingtai City.

Office Address: Industrial park of Baixiang County, Xingtai City.

Mr. Zhang: 18331997691

Mr.li: 15100392682

Mr.fu :15731999699

Installation of slurry pump

Part of the article:Popularity:18Publication time:2016-11-26 9:14:50

The assembly precision of CMZ slurry pump internal components must be in accordance with the standards, including the impeller, seal and bearing; in the transport process, will inevitably cause the internal components of slurry pump loose, therefore, the pump is mounted to the base, to find it leveling. The outlet and entrance of the slurry pump are connected and the stress will be produced after the pipe is broken. If the alignment is not good, it is easy to cause radial movement, shaft vibration and shaft deviation in the operation, so that the power consumption increases, the bearing and sealing wear, and shorten the service life.

In order to improve the suction performance of slurry pump, the suction line should be as short as possible to minimize the bend pipe pump (preferably with large curvature radius elbow), in order to reduce the resistance loss of pipeline. In order to prevent the pump from cavitation, the pump suction line should be as much as possible to avoid accumulation of gas bladder shaped parts, can not be avoided, should be located in the sac shaped exhaust valve. When the suction pipe of the pump is vertical, if the suction pipe is equipped with a reducer, it should be equipped with eccentric reducer, so as not to form the airbag


Hot-sale product More+

Hebei Shengbo Pump Industry Co., Ltd

Office Address: Industrial park of Baixiang County, Xingtai City.

Office Tel: 18331997691

© Copyright 2001 - 2015 csshuobo.com All rights reserved  

Scavenging, entering the mobile site

微信公众号 微信名片 WeChat card